威尼人斯网址

Hello, welcome to Zhejiang Jie Li Da HVAC Technology Co., Ltd. official website!

Popular science column

You are here:Home > Popular science column

Anti-season installed [to warm water separator], h

  • Anti-season installed [to warm water separator], h
  • 2017-02-23 19:02:44
  • Unconsciously, we have gradually entered the fall, many people have not swiftly from the summer heat in the sky, the fall has come. Are you ready to challenge the cold winter in the coming winter? Do you start the season?

        Maybe you will think, now will not be too early to install the warm, winter has not come, the weather has not become cold yet! Generally 11, 12 months will consider the installation of warm tube, is still early If you think so, it is wrong. According to statistics every year in October began to buy to warm accessories, to warm the water dispenser /index.php?s=/, brass fittings will increase, and install the warmer of the user even more many. To December, only to install the warmth of the user may not row on the team, after all, the installation staff is limited, the user has so much, the weather gradually cooling, will naturally extend the duration. So early planning, the user is necessary.

        What are the benefits of the installation in the autumn?

    1. good weather, do not want you summer heat, no winter so cold, natural construction fast

    2. Installation to warm the pipe, to warm the water heater, to warm the need for cement backfill, and cement will take some time to get rid of autumn dry time only 2 to 3 days, and winter will be more than a week.

    3. To warm the pipe installed, you need to test no problem to use. If you find the problem in the winter, there is to catch up with the installation peak, the problem to drag a period of time to solve. And autumn has just started to install warm, construction staff is not too busy, can quickly help you solve the problem.

        Said so much, I believe you do not know the benefits of anti-season installed warm it, that does not act up!

    Zhuji manifold /index.php?s=/products.html


What factors affect the use of electric ball valve

  • What factors affect the use of electric ball valve
  • 2017-02-23 19:02:46
  •   

    Electric ball valve in the use of the process, the most affected the main factors: friction, wandering, valve shaft twist, amplifier and so on.

        1, different control valve on the friction is not the same, such as the rotary valve for the high seat load caused by the friction is very sensitive, so use this note. But for some sealed type of high seat, the load is necessary to get off the level. The effect of this deviation on the process is obvious and is simply decisive.

        2, wear. Valve /index.php?s=/products/show/pid/57.html Wear in normal use is inevitable, but the wear and tear of the lubrication layer is the most powerful, the other Pressure caused by the load will also lead to the wear of the seal layer, which are the main factors leading to increased friction.

        3, filler friction is the main source of friction control valve, the use of different filler, the friction caused by a great difference.

        4, the type of different agencies also have a fundamental impact on the friction, in general, the spring film actuator is better than the piston actuator.

    Related Products Recommended: Ball Valve /index.php?s=/products/show/pid/81.html


How does the floor warmer work?

  • How does the floor warmer work?
  • 2017-02-23 19:02:57
  • Floor under the laying of pipes, the way to warm the heating is an advanced and effective way of heating, because the hot air to rise, so the air is warm in the space together with the soles of the feet directly to the heat source to achieve the heating effect Naturally effective. To warm the main system

    Three aspects, for the heating system, control system and heat transfer system, and the control system is the core of the whole floor to warm the water is the control of the entire control system hub.

    The main role of the warm water separator is the partial pressure, when the hot water into the room, after filtering into the main pipeline, this filter can make the impurities in the water filter out, so as to avoid the accumulation of impurities in the pipeline, resulting in pipeline Clogging and loss of heating effect. Main water

    So that the main bar can be equal at the same height so that the hot water can be evenly distributed to each branch. After the heat exchange system after the various branches of the hot water and then flow back to the main bar, so that the hot water recycling at this time the actual temperature of hot water is still high,

    The efficiency saves the resources. The principle of the warm water separator is simple, but this simple principle supports the core of the floor heating system and plays an extremely important role. Water dispenser, sub-catchment, to warm the small mystery of the water separator, visit the daily Zhejiang Jie Li Da Pipe Co., Ltd. can know

    dawn!


To warm the daily use of the water needs to pay at

  • To warm the daily use of the water needs to pay at
  • 2017-02-23 19:02:58
  • To warm the daily use of the water needs to pay attention to, Jie Lida reminders

           The first time to use the warm water separator, because the pipeline itself, the existence of the pressure, will make the water can not enter well, resulting in the operation of the warm water is not normal, so the first use, it should be inside the air discharge. The operation method is very simple, the following small series to do a brief introduction.

          First turn off the heating of the overall return valve and the loop of the control valve, and then select the warm water on a control valve to open, and then open the water separator on the drain valve on the exhaust valve, drain the air And then close the valve, while opening the next valve. In this way, so that each air will be drained and then open the valve, after the completion of each route to ensure that the air can be ruled out, the system can be normal operation.

          After the first exhaust can be hot water, should be gradually added to the hot water, open the warm water separator water supply total loop valve, the water temperature gradually increased into the pipeline circulation, and check the warm water heater interface, , At the same time one by one to open the road gate, under normal circumstances to run the water separator, such as encountered problems such as pipeline water seepage, the main valve should be closed and then contact the supplier. Water dispenser, sub-catchment, to warm the water separator, geothermal water separator information first Jie Lida.


Extended to warm water separator tips, Jie Lida tu

  • Extended to warm water separator tips, Jie Lida tu
  • 2017-02-23 19:02:59
  • Extended to warm water separator tips, Jie Lida tube industry

         The warm water separator is now an indispensable part of the functional family, the use of the method is directly related to the life of the warm water separator, the following talk about the extension of the warm water separator life tips, we hope to help.

    1, cleaning. There is a filter on the front end of the manifold, during the annual heating period on a regular or irregular basis of the filter at the bottom of the filter removed to carry out cleaning to ensure that the water inside the clean. In addition, after the heating is finished, the pipe is rinsed with water.

    2, the valve. If the household is not at home for a long time, but the functional equipment is normally open, the total volume of the manifold can be reduced by the amount of circulating water, and can not be closed. In the whole winter if the room is not heating, should be the tube of water blowing.

    3, thermostat. The water separator can be divided into the room or area of the heating temperature, the user can adjust the temperature of the room according to their own; water separator manual exhaust valve, the user can own the gas inside the pipeline to ensure that the pipeline The heating temperature.

    4, temperature control. Heating at the beginning, the temperature will not immediately felt during this period of indoor ground concrete layer is gradually heating, storage of heat, to be 2-4 days later, you can achieve the design temperature. Such as the user's own heating water temperature should not exceed 65 ℃.

           On the other hand, in the floor heating system to warm the water heater cleaning maintenance is also very important. After long-term use, it is easy to warm the pipe and the warm water pipe connection and other important positions to form a knot, a long time do not wash more likely to cause pipe embolism, affecting the heating water and temperature, serious or even loss of heating function. Therefore, it is recommended that after two to three heating periods, especially after the end of the heating is best to clean the geothermal system to carry out maintenance cleaning


39 条记录 7/8 页 上一页 下一页 威尼人斯网址 << 6 78

Home  |  Jie Lida water separator  | about us  |  Products  |  Download  |  Careers  |  Technical Support  |  contact us

浙ICP备10003325号 Zhejiang Jie Lida Pipe Industry Co., Ltd Contact: Li Yunhai mobile number:13606852630 phone:0575-87669088 fax:0575-87669008

Address: Zhejiang Province Zhuji City shop town Yang Yan Road Zip code:311835   Backstage management

XML 地图 | Sitemap 地图